Wildfire 2.0 REF_DES note (HARNESS)

[aditz007]

For Large Harness Assemblies



Does anyone (among experienced Pro/Cabling users) know what is to be
done to have the notes containing the reference_designator (REF_DES)
placed just near the component, just like in Pro/E 2001.



This problem is very very annoying when working with large harness
assemblies because it's imposible to find a certain component having
those notes with very long leaders (arrows). I'm still wondering what
was wrong with the display of those notes in Pro/E 2001, it was just
fine like they were placed on the connector without any leader.



I've been working in Pro/E 2001 for 2 years and in WF 2.0 for a couple of months.



Best regards

Thank you

 

[pmack009]

You can just set you Model tree to show the ref des not sure how to have it in your model

 

[Huug]

>Tools>Environment>Reference Designators


Model Tree>Settings>Tree Colums>Type ECAD params>ECAD_REF_DES> >> >OK

 

[NiallDarwin]

Thanks for the input Huug but I don't think you've answered aditz007's question.


>Tools>Environment>Reference Designators simply turns on the display of the reference designators. What Aditz (& myself) wanted to know is how to changethese displayed references to be like 2001, i.e. without leaders. Any ideas?


Thanks,


Niall

 

[orionlidji]

In WF2 (which I'm using) you can just move each reference to where you like it to be:

from the upper menu-->Edit-->Setup-->Notes-->Move-->click and drag the Reference Designator