My PC does the FE stress calculations I am attempting with ease, but puts the 'stressed' part on screen in the 'default' orientation. When I attempt to rotate it, the PC freezes. This is only the simple 'square key' example in the PTC Tutorial file, so isn't a very complicated part.
The basic PC spec is P4 2.5GHz, 512MB DDR ram, ATI Radeon 9000 Grahics Card with 128MB DDR ram
Any ideas as to what might cure this?
The basic PC spec is P4 2.5GHz, 512MB DDR ram, ATI Radeon 9000 Grahics Card with 128MB DDR ram
Any ideas as to what might cure this?