How to set dtm planes, dtm axes, dtm points OFF

[Tunalover]

Anybody know a config.pro or config.dtl setting that will control if datums (planes, axes, points) and csys are displayed when a drawing is opened? Whenever I open a drawing, the datums and csys are ON by default. Is there any way to make them OFF by default?



Thanks!

Tunalover

 

[Brian_Adkins]

DISPLAY_AXES

DISPLAY_AXIS_TAGS

DISPLAY_COORD_SYS

DISPLAY_COORD_SYS_TAGS

DISPLAY_PLANES

DISPLAY_PLANE_TAGS

DISPLAY_POINTS

DISPLAY_POINT_TAGS



(set each to YES or NO)



http://www.proesite.com/cgi-bin/config.pro_search.cgi?search_term=display_&version=2001&db=all



-Brian Adkins

 

[Tunalover]

Brian-

Thanks. Your link is to 2001 options. Do you know the difference between the options shown in black and the options shown in blue in the 2001 options in the link?

Tunalover

 

[Brian_Adkins]

I think the options are the same in Wildfire...



http://www.proesite.com/cgi-bin/config.pro_search.cgi?search_term=display_&version=wildfire&db=all



By the way, this is a great site for searching for these options:

http://www.proesite.com/newframe.htm?/UTIL/index.html



-Brian Adkins

 

[dr_gallup]

I made a special config file named config.plot that has the display of all datums, etc. turned off. My PLOT mapkey loads this config file and does a zoom reset prior to creating the plot file. This way I never have to worry about the current settings when I want to plot.

 

[Tunalover]

Guys-

I'm running 2000i^2. I tried a few from the list:

DISPLAY_AXES

DISPLAY_AXIS_TAGS

DISPLAY_COORD_SYS

DISPLAY_COORD_SYS_TAGS

DISPLAY_PLANES

DISPLAY_PLANE_TAGS

DISPLAY_POINTS

DISPLAY_POINT_TAGS

and discovered that the config.pro editor does not recognize them. Any more ideas? It seems that the config options are good only for 2001 and up.



Thanks!

 

[adicar01]

try this one:



datum_display NO

axis_display NO

datum_point_display NO

 

[Tunalover]

adicar01-

Thanks for the tip! It worked! Thanks also to the other guys!

Tunalover

 

[Brian_Adkins]

You can search for config options for WF, 2001, 2000i2, r20 and even r19 on Olaf's website:



http://www.proesite.com/newframe.htm?/UTIL/view_config.html



-Brian Adkins