Continue to Site

Welcome to MCAD Central

Join our MCAD Central community forums, the largest resource for MCAD (Mechanical Computer-Aided Design) professionals, including files, forums, jobs, articles, calendar, and more.

Hide centreline i runners

xcad



Runner is a function I use when I create a distribution channel in injection mold.



When I create theese runner that apears centrelines in each

runner / channel.



Hope tihs is enough



KHO
 
Check your config.pro options to see if the default of no has been changed to yes for:

show_axes_for_extr_arcs



Setting this to yes often gives axes or centerlines to features you would not otherwise expect to have them.
 
Secondly, adding the runner feature to a specific layer, and then selectively blanking the layer, upon repaint, will blank the centerline (axes, 2D features associated with the solid geometry). In part model, blanking a solid feature ONLY removes the 2D geometry, as I said, the centerlines.



In drawing mode, the shown axes could be erased selectively, by feature, etc.



Hiding the feature associated with the undesirable centerline will remove the entire feature from view until Unhidden.
 
Thanks CADTEMP2



I solve the problem by putting the centerline on a layer

( centerline ) and blank them afterwords.

Centerlines can be connected to a layer as curves.



KHO
 

Sponsor

Articles From 3DCAD World

Back
Top