Mechanizer
New member
I am trying to turn an elliptical profile, (Concave in shape),major radii 101.5 and minor radii 98.8, using Pro-E 5.0 manufacturing/turning/turn profile. Radius of tool 2.123mm
Pro-E get it arc. I tried different strategies
1.Pro take it one arc when use arc only in circular interpolation
2.Eight arcs when points& arc
3.About 200 points when points only in "parameters"
Third one was the latest approach with the defect that profile get "Kinks" or fringes(rough) with using these points with G01.
Its a ellipse so no Circular interpolation can be used to get finished profile.
Isn't any way for Elliptical Interpolation or get a large number of points of profile in manufacturing.
I have tried Microsoft excel to give points of elliptical profile with 1 micron increment, but machine is not taking tool compensation for such a minute increment.
Please help me out. I am doomed
Pro-E get it arc. I tried different strategies
1.Pro take it one arc when use arc only in circular interpolation
2.Eight arcs when points& arc
3.About 200 points when points only in "parameters"
Third one was the latest approach with the defect that profile get "Kinks" or fringes(rough) with using these points with G01.
Its a ellipse so no Circular interpolation can be used to get finished profile.
Isn't any way for Elliptical Interpolation or get a large number of points of profile in manufacturing.
I have tried Microsoft excel to give points of elliptical profile with 1 micron increment, but machine is not taking tool compensation for such a minute increment.
Please help me out. I am doomed