Right mouse button purge

[etron]

I have ran into a problem that I can not solve and our folks in IT can not offer any assistance either. Here is the problem.


Our engineering group once had a T: drive that all CAD files were stored on. At that time I used the prefered method from ptc on using the right mouse button for purging directories...worked great! Then our IT department discovered that we were running out of space on the T: drive and switched all CAD files to a new Z: drive. Ever since then my right mouse button has not worked to purge files any more. PTC could not offer any help on this. We are a small group of four and I am relatively new at doing some Admin duties here, but I used this function a lot to clean out file folders.We are on Wildfire 2.0. Doese anyone have a suggestion or a different fix? Any help would be greatly appreciated.
Edited by: etron

 

[jswinderman]

I'm not familiar with the right buttom purge.We use the purge bat file located in the bin folder in the wildfire software.

 

[wsylvester]

http://www.sherpa-design.com/kb/Pro-e_Right-Click_Purge.pdf


sounds like it doesn't point to the bin directory

 

[etron]

http://www.sherpa-design.com/kb/Pro-e_Right-Click_Purge.pdf


sounds like it doesn't point to the bin directory





Yes, I am familiar with this procedure and that is what I started out with and everything worked great. However as I stated before we then switched drives and now that same function of the right mouse button will no longer work.

 

[etron]

http://www.sherpa-design.com/kb/Pro-e_Right-Click_Purge.pdf


sounds like it doesn't point to the bin directory

 

[wsylvester]

are there any spaces in the new drives name?

 

[wsylvester]

and does the dos window pop up and close ...without doing anything?