DonChunior
New member
Hi together!
I've a part with a planar surface which is thickened.
If I want to modify the thickness using "edit" the maximum possiblevalue is 100mm. If I use "edit definition" the maximum value is 484.97mm.
The size of the surface is 280x280 and the absoluteaccuracy of the model is set to 0.01.
What could be the reason for the limitations of the thickness?
I work with Pro/E Wildfire 3.0 M210.
2009-05-25_051403_problem_thicken.zip
I've a part with a planar surface which is thickened.
If I want to modify the thickness using "edit" the maximum possiblevalue is 100mm. If I use "edit definition" the maximum value is 484.97mm.
The size of the surface is 280x280 and the absoluteaccuracy of the model is set to 0.01.
What could be the reason for the limitations of the thickness?
I work with Pro/E Wildfire 3.0 M210.
2009-05-25_051403_problem_thicken.zip