I am making a drawing (2D) from an assembly.
The assembly is projected as a dimetric view, on the drawing sheet.
The part are added to the same drawing sheet.
It works fine, but I have one problems.
There are some angles and plates in the assembly. When I insert the parts, to the drawing, to add dimensions,some partsare under an angle.
Normally on a drawing youmake one side of the angle profle horizontal. (the longest side) How do I do this in solidworks ?
(rotate the "sketch" in a drawing view to have a differentsidealingned with the X axes.)|
I made with a paint a picture to explain my problem.
http://www.xs4all.nl/~jamathi/angle.JPGhttp://www.xs4all.nl/~jamathi/angle.JPG
A is what I get, B is what I want. http://www.xs4all.nl/~jamathi/aero.gif
The assembly is projected as a dimetric view, on the drawing sheet.
The part are added to the same drawing sheet.
It works fine, but I have one problems.
There are some angles and plates in the assembly. When I insert the parts, to the drawing, to add dimensions,some partsare under an angle.
Normally on a drawing youmake one side of the angle profle horizontal. (the longest side) How do I do this in solidworks ?
(rotate the "sketch" in a drawing view to have a differentsidealingned with the X axes.)|
I made with a paint a picture to explain my problem.
http://www.xs4all.nl/~jamathi/angle.JPGhttp://www.xs4all.nl/~jamathi/angle.JPG
A is what I get, B is what I want. http://www.xs4all.nl/~jamathi/aero.gif