Greetings:
How could you create an uneven (half toward the front and at an angle toward the back)split box in Pro/E (WF2) http://home.comcast.net/~wangphk/ProE/Parts/SplitBox.jpg so:
- when you modify the original shape, features, overall dimensions etc the top and bottom will update as well.
- a living hinge could be added later on simulating the openand close state.
This box is created using Solidworks, consisting of the following common features to both top and bottom parts:
- a based loft protrusion with 3 parallel sketches.
- a slant cut at both ends
- corner and edges fillets
- two bottom slot & revolve protrusions making the feet
- a fillet between the foot and the box
- a shell
- a rectangular cut in the front face
- a pattern hole cut through the top and bottom half
- a surface extrusion seperate the box horizontally (starts in the middle of the box toward the front and going at an angle toward the back)
- a split to create the top and bottom half parts.
Thank you for your time and help.
Frank
How could you create an uneven (half toward the front and at an angle toward the back)split box in Pro/E (WF2) http://home.comcast.net/~wangphk/ProE/Parts/SplitBox.jpg so:
- when you modify the original shape, features, overall dimensions etc the top and bottom will update as well.
- a living hinge could be added later on simulating the openand close state.
This box is created using Solidworks, consisting of the following common features to both top and bottom parts:
- a based loft protrusion with 3 parallel sketches.
- a slant cut at both ends
- corner and edges fillets
- two bottom slot & revolve protrusions making the feet
- a fillet between the foot and the box
- a shell
- a rectangular cut in the front face
- a pattern hole cut through the top and bottom half
- a surface extrusion seperate the box horizontally (starts in the middle of the box toward the front and going at an angle toward the back)
- a split to create the top and bottom half parts.
Thank you for your time and help.
Frank