Hole generation Failure

[msiva1981]

Hi all,


Iam trying to Model a Connecting Rod. I need to create a hole through an axis that passes for a certain depth. No matter wat i try i end up with the Failure Diagnostics Dialog Box. I have attached a Screen Shot which i guess would make things clear.


Thanks


SivaView attachment 529

 

[whit2498]

move your datum to the other side of the hole and cut the other way.

 

[msiva1981]

Hi Whit2498


Thanks for the reply. I tried moving the Datum to the other side and cutting the other way. Did not help either.


Can u people help me out


Siva

 

[laserman2000]

Use a revolve round that axis

 

[arroyopr]

Hi:
This looks like a symmetric part, so what i suggest you is to offset the vertical datum and create avertical axisthen create a coaxial holes on your horizontal datum it might work.


good luck!

 

[rf4jock]

"HOLES" per se, are often finicky. Try a "CUT" from the original datum.