I have been told major words cimfil sections are executed following an order. Does anybody know about this?
CIMFIL/ON,MACHIN
CIMFIL/ON,LOADTL
CIMGIL/ON,COOLNT
ETC...
I am working on the following code:
%
O0004
G53 X420 Z420
( / PART NAME : 229040AB_004)
( / DATE TIME : 21-MAR-06 16:19:28)
( / CUT FEEDRATE & UNITS : 0.200 MMPR)
( / TOOL NAME : T01)
( /  ; TOOL COMMENTS)
T0101
G54
G92 S3000
G96 S200 M4
G18 G40 M8
G1 X46.7 F.2
...
and i want the line G53 X420 Z420 appear after the tool load, but it appears before the PPRINT messages. This line does not come from the NCL file, it is a custom line written in FIL:
CIMFIL/ON,MACHIN
RSLT=POSTF(13)
INSERT/(TEXT/'G53 X420 Z420$')
CIMFIL/OFF
I am a beginner with GPOST, any help would be appreciated.
Thks.
CIMFIL/ON,MACHIN
CIMFIL/ON,LOADTL
CIMGIL/ON,COOLNT
ETC...
I am working on the following code:
%
O0004
G53 X420 Z420
( / PART NAME : 229040AB_004)
( / DATE TIME : 21-MAR-06 16:19:28)
( / CUT FEEDRATE & UNITS : 0.200 MMPR)
( / TOOL NAME : T01)
( /  ; TOOL COMMENTS)
T0101
G54
G92 S3000
G96 S200 M4
G18 G40 M8
G1 X46.7 F.2
...
and i want the line G53 X420 Z420 appear after the tool load, but it appears before the PPRINT messages. This line does not come from the NCL file, it is a custom line written in FIL:
CIMFIL/ON,MACHIN
RSLT=POSTF(13)
INSERT/(TEXT/'G53 X420 Z420$')
CIMFIL/OFF
I am a beginner with GPOST, any help would be appreciated.
Thks.