Dynamic machine simulation

[cristelino]

Is this fantastic new software named Creo to do DMC?
Dinamical machine simulation was announced like a big achievement
Is ir not because i did`nt find

Cristelino

 

[orac]

You can find it where you define the machine. It is under the assembly tab.

There are several example configurations available.

Best regards,

John Bijnens

 

[cpoirier]

John, can you point me in the right direction for the example configurations.
If possible could you post some?

Chris

 

[fdcam]

In WF5 I follow the rules below:
<div ="freeClearNone"><div ="freeText">

A.The components of the machine assembly
should be connected to each other using sliders and pins

B. I use this names:
<strong style="font-weight: normal;">*I use a[/b] coordinate system
named MACH_ZERO for absolute origin of the machine assembly.
<strong style="font-weight: normal;">*I use a[/b] coordinate system named TOOL_POINT for the spindle loading position of the machine assembly.


</div>
</div>

 

[cristelino]

fdcam

I have for example 5 origins already set on my machine.
When i change the origin with :
G90G56 x0 y0 i want to simulate the program in that new origin.
Is possibble to have manny origin in Wildfire 5 simulations and where i can find models of machines already modeled in Proe?

Best regards
Cristel

 

[fdcam]

Cristellino,
Machine Assemblies to Show Machine Kinematics Within Pro/NC, are made to simulate the ncl file but not the ISO file, if you change the origin you can simulate the tool path with the new origin.
You can display tool path and machine simulation for completely defined steps or operations. You can use the machine model during tool-path simulation to dynamically
check for collision between tool, holder, fixtures, machine components,
and the reference part.
You can find some examples in Ptc site following the link http://www.ptc.com/appserver/wcms/standards/freefull_cskdb.j sp?&im_dbkey=98152&icg_dbkey=900

Best regards
fdcam

 

[Jouni]

Hello, I have assembly of Fadal Vertical Machining Centre and 4th and 5th axis and works fine with Creo Machine kinematics. But i do not have lathe. I can change my files to working lathe. Mazak SQT is what I need, but the other machines is ok too. You can find videos from YouTtube.


GOLD-CAM


http://www.dlc.fi/~gold-cam/


http://www.youtube.com/watch?v=FWkeG0bXP38


http://www.youtube.com/watch?v=-aUH8QlLFtE


http://www.youtube.com/watch?v=TtHbTN2VTSg
Edited by: Jouni

 

[cristelino]

Thanks guys
My wish is to see exactly what is happening (virtualy first) in my workshop.
i will post a lot of things after a had enough information available to share with you.
thanks for replies


Cristelino

 

[NM_88]

http://communities.ptc.com/videos/1733
Edited by: NM_88

 

[lovehipr]

Hello,everybody.I am a newer here.I like to make friends.
If u are the people that like to make friends too,just contact me.Haha
coach outlet Office 2007 Coach Glasses