Go easy on me guys/girls, this is my first posting!
My scenerio is that I have a top plate part model that has some tapped holes drilled into it. This part then has several bushes welded into it. Because of the welding process, we skim the top surface of the part (via an assembly cut)once the welding has been completed. This is where my problem arises. The part is cut okay, but the cosmetic threads do not change to suit. Therefore when you look at the drawing, you can see the threads standing proud. Obviously I would like to change this to suit.
Any advice will be greatly appreciated!!!
My scenerio is that I have a top plate part model that has some tapped holes drilled into it. This part then has several bushes welded into it. Because of the welding process, we skim the top surface of the part (via an assembly cut)once the welding has been completed. This is where my problem arises. The part is cut okay, but the cosmetic threads do not change to suit. Therefore when you look at the drawing, you can see the threads standing proud. Obviously I would like to change this to suit.
Any advice will be greatly appreciated!!!