AutobuildZ

[brunoth]

Hello,


I want to use AutobuildZ in Wildfire. It is installed in the directory Pro/e.


But I can't access to the AutobuildZ toolbar --> it's inactiv !


When i go to tools\auxiliary applic thre's no way to access to AutobuildZ


What is the solution ?


Thanks for help !


Brunoth

 

[sebastian]

Hi,


I faced a similar problem whichwas solved by using the patch for Timeout issue.


Regards


Sebastian

 

[brunoth]

Hello,


I have an other answer (by an other way) to use Autobuildz


To activate the functions of "autobuildz" you must add in your config.pro the following option :


autobuildz_enable

 

[jvonfeix]

Here's the command I used:


protkdat C:\Program Files\AutobuildZ/text/protk.dat


WARNING!!!!!!!!!!!


When I had this command in the config.pro, it caused Wildfire (2.0 m050) to crash each time I opened an assembly after performing "erase not displayed". Once I removed it from the config.pro I had no more crashes nor AutobuildZ. Good luck!