Ok, new problem in our move to Creo/Windchill. We have our config files set up how we want, but whenever a feature (or new part) is activated for the FIRST time, there is about a 90 second delay before it actually starts. So for example:
New part (90 sec delay)
Extrude (90 sec delay)
Sketch(90 sec delay)
Sketch(no delay)
Extrude (no delay)
Pattern (90 sec delay)
There is no increase in the system usage during these delays, only a spike in network traffic. We found three options that are causing this: pro_group_dir, pro_material_dir, andpro_format_dir. When these are set to aWindchill location(wtpub://Windchill/...) we get the delay as described above. When they are set to a networked drive (I:\...) there is no delay. The files in the Windchill and networked drive directories are identical.
In addition, therecan be other config options pointing to Windchill that do not cause a delay (format_setup_file, template_drawing, template_solidpart, sketcher_palette_path, and mdl_tree_cfg_file).Any ideas?
New part (90 sec delay)
Extrude (90 sec delay)
Sketch(90 sec delay)
Sketch(no delay)
Extrude (no delay)
Pattern (90 sec delay)
There is no increase in the system usage during these delays, only a spike in network traffic. We found three options that are causing this: pro_group_dir, pro_material_dir, andpro_format_dir. When these are set to aWindchill location(wtpub://Windchill/...) we get the delay as described above. When they are set to a networked drive (I:\...) there is no delay. The files in the Windchill and networked drive directories are identical.
In addition, therecan be other config options pointing to Windchill that do not cause a delay (format_setup_file, template_drawing, template_solidpart, sketcher_palette_path, and mdl_tree_cfg_file).Any ideas?