Join our MCAD Central community forums, the largest resource for MCAD (Mechanical Computer-Aided Design) professionals, including files, forums, jobs, articles, calendar, and more.
Does ANyone know how to change the resolution of the CAD files. Someone tells me that it needs to be minimum0.010 mm (0.0003937 in.). I do not know where to change this setting. I am using wildfire 1.0. Can anyone help me here?
You really should not change accuracy unless you have a good reason. Regeneration problems, geometry errors, data exchange problems, etc. are good reasons. "Someone tels me it needs to be .01 mm" is not a good reason.
Thanks for the help olivier1979, that is exactly what I needed to fix the problem. I needed to check the resolution because an SLS model that I sent off for came back with the round features being hex-shaped. I wanted to double check my resolution before I layed blame to another company. The company didn't set there resolution correct is where the mix up was. Again thanks for all the help.
If its to do a RP part, maybe you can export directly your STL file by your self, almost every service place should work with this format. Change the values in deviation if you need to change the size of the triangle but the default value should be ok.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.