Need to correct post. Sample program below shows the same tool being recalled for a different function. I actualy have the tool used for spot drilling and then using it to chamfer corners on the part. The tool is listed in my tooling list as a Drill and as Milling.
What do I need to change in my Post Processor to correct this problem?
Thanks
(T77490-1 SPOT DRILL)<?:namespace prefix = o ns = "urn:schemas-microsoft-comfficeffice" />
(SPOT DRILL BOTH SIDES)
N1045 M98 P9120 (Tool Change Sub Program)
N1050 T03
N1055 S3000 M3
N1060 G0 G90 G54 X-5.69 Y.0916 A90.
N1065 G43 H02 Z1. M8
N1070 G81 G99 Z.2 R.375 F15.
N1075 G80
N1080 G0 Z1.
(T77490-1 SPOT DRILL)
N1085 M98 P9120 (Tool Change Sub Program)
N1090 T03
N1095 S5000 M3
N1100 G0 X-6.6678 Y.5122 A90.
N1105 G43 H02 Z1. M8
What do I need to change in my Post Processor to correct this problem?
Thanks
(T77490-1 SPOT DRILL)<?:namespace prefix = o ns = "urn:schemas-microsoft-comfficeffice" />
(SPOT DRILL BOTH SIDES)
N1045 M98 P9120 (Tool Change Sub Program)
N1050 T03
N1055 S3000 M3
N1060 G0 G90 G54 X-5.69 Y.0916 A90.
N1065 G43 H02 Z1. M8
N1070 G81 G99 Z.2 R.375 F15.
N1075 G80
N1080 G0 Z1.
(T77490-1 SPOT DRILL)
N1085 M98 P9120 (Tool Change Sub Program)
N1090 T03
N1095 S5000 M3
N1100 G0 X-6.6678 Y.5122 A90.
N1105 G43 H02 Z1. M8