nick.falconer
New member
I'm currently learning solidworks at uni. I have been
working on a project and I've got a bit of a problem.
I have a rotor that spins inside a cylinder, the rotor is
offset from the cylinder. It has rotor blades that can
slide in and out of the rotor but need to keep in contact
with the outside of the cylinder. But I have tried to
mate it and the blades interfere with the cylinder.
It is probably and easy fix, or at least I hope so, just
not sure how.
I've attached the file with the cylinder, rotor and one
rotor blade in one file and the assembly in another with
the mates so you can see the issue I'm having.
Thanks
Nick
<a target="_blank" href="uploads/nickfalconer/2011-08-
<br / target="_blank">16_205716_Assembly.zip">2011-08-
16_205716_Assembly.zip</a>
<a target="_blank" href="uploads/nickfalconer/2011-08-
<br / target="_blank">16_205812_Assembly2.zip">2011-08-
16_205812_Assembly2.zip</a>
working on a project and I've got a bit of a problem.
I have a rotor that spins inside a cylinder, the rotor is
offset from the cylinder. It has rotor blades that can
slide in and out of the rotor but need to keep in contact
with the outside of the cylinder. But I have tried to
mate it and the blades interfere with the cylinder.
It is probably and easy fix, or at least I hope so, just
not sure how.
I've attached the file with the cylinder, rotor and one
rotor blade in one file and the assembly in another with
the mates so you can see the issue I'm having.
Thanks
Nick
<a target="_blank" href="uploads/nickfalconer/2011-08-
<br / target="_blank">16_205716_Assembly.zip">2011-08-
16_205716_Assembly.zip</a>
<a target="_blank" href="uploads/nickfalconer/2011-08-
<br / target="_blank">16_205812_Assembly2.zip">2011-08-
16_205812_Assembly2.zip</a>