Hi all
This may be very simple quetion...
anyway how to take a outputof min z travel and max z travel and after 90% of z travel feed rate should be 10% of the feed_rate value
example (marked in the red is the requirement)
Min Z Travel z-1
Max Z travel z-10
G00 G90 Z0.0
G43 X13.381 Y-27.23 S5000 H00
Z10. M03
Z3.
G01 X3.45 Z.339 F500.
X3.449 Y-32.429 Z-1.054
X28.197 Z-7.685
(after Z travels 90% feed rate changes to 10% of feed_rate)
X3.449 Y-32.429 Z-8.5
X28.197 Z-7.685
Y-27.23 F10
Thanks in Advance
This may be very simple quetion...
anyway how to take a outputof min z travel and max z travel and after 90% of z travel feed rate should be 10% of the feed_rate value
example (marked in the red is the requirement)
Min Z Travel z-1
Max Z travel z-10
G00 G90 Z0.0
G43 X13.381 Y-27.23 S5000 H00
Z10. M03
Z3.
G01 X3.45 Z.339 F500.
X3.449 Y-32.429 Z-1.054
X28.197 Z-7.685
(after Z travels 90% feed rate changes to 10% of feed_rate)
X3.449 Y-32.429 Z-8.5
X28.197 Z-7.685
Y-27.23 F10
Thanks in Advance