thrawn7977
New member
Hi, Is there any way to do a quick visual (either
automated or manual) check to see the difference between
2 drawing revs?. example. Say I have a 2d cable drawing
with a single connector on one end and it splits into 2
connectors on the other end. rev a shows that the "Y" end
both branches are the same length. rev b one of the
connectors gets extended.
I want to be able to overlay both drawings or pdf's of
them and make sure of the changes that were made. Ideally
one drawing color would be yellow the other would be blue
so it would show green where they are the same and blue
or yellow where they are different. I would also like to
do this without having to change the pro/e colors. any
ideas to compare drawings?
thanks
automated or manual) check to see the difference between
2 drawing revs?. example. Say I have a 2d cable drawing
with a single connector on one end and it splits into 2
connectors on the other end. rev a shows that the "Y" end
both branches are the same length. rev b one of the
connectors gets extended.
I want to be able to overlay both drawings or pdf's of
them and make sure of the changes that were made. Ideally
one drawing color would be yellow the other would be blue
so it would show green where they are the same and blue
or yellow where they are different. I would also like to
do this without having to change the pro/e colors. any
ideas to compare drawings?
thanks