Hi ALL,
Sorry to bother you all.I have a question regarding the config.pro file. Below is what is written in my config.pro file
mapkey $F3 @MAPKEY_NAMEpurge all documents;@MAPKEY_LABELPURGE;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Windows`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Windows.psh_win_open_system`;
mapkey $F2 @MAPKEY_NAMEturn on/off 3D Notes;@MAPKEY_LABEL3D_Notes;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Utilities`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Utilities.psh_util_env`;\
mapkey(continued) ~ Activate `env_dlg` `DispMdlNotes`0;
mapkey $F1 @MAPKEY_NAMEErase not displayed;@MAPKEY_LABELErase_ND;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;\
mapkey(continued) ~ Select `main_dlg_cur` `File.cb_file_erase`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `File.cb_file_erase`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_erase_not_disp`;
mapkey $F3 @MAPKEY_NAMEpurge all documents;@MAPKEY_LABELPURGE;@SYSTEMpurge;
pen1_line_weight 2
pen2_line_weight 1
pen3_line_weight 1
pen4_line_weight 2
pen5_line_weight 2
pen6_line_weight 2
pen7_line_weight 2
pen8_line_weight 2
use_software_linefonts set to Yes
allow_anatomic_features YES
display_coordinate_sys YES
display shade
default_dec_places 3
drawing_setup_file C:\PRO_E_WF3\Active_Drawing.dtl
edge_display_quality very_high
mdl_tree_cfg_file C:\PRO_E_WF3\tree.cfg
orientation ISOMETRIC
start_model_dir C:\Program Files\proeWildfire 3.0\templates
template_designasm C:\Program Files\proeWildfire 3.0\templates\inlbs_asm_design.asm
template_solidpart C:\Program Files\proeWildfire 3.0\templates\inlbs_part_solid.prt
plotter_command WINDOWS_PRINT_MANAGER
tol_mode nominal
WHEN i created new assembly file, the datums and views are there. However, when i want to add new part, by clicking
1) CREATE A COMPONENT IN ASSEMBLY MODE
2) SELECT PART tab, type in the name, click OK
under creation method, i see copy from existing, locate default datum, empty, create deatures.
Under COPY FROM box, the part name is always "inlbs_part_bulk.prt" instead of "inlbs_part_solid.prt"
what am i doing wrong??
thanks for your help..
Sorry to bother you all.I have a question regarding the config.pro file. Below is what is written in my config.pro file
mapkey $F3 @MAPKEY_NAMEpurge all documents;@MAPKEY_LABELPURGE;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Windows`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Windows.psh_win_open_system`;
mapkey $F2 @MAPKEY_NAMEturn on/off 3D Notes;@MAPKEY_LABEL3D_Notes;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Utilities`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Utilities.psh_util_env`;\
mapkey(continued) ~ Activate `env_dlg` `DispMdlNotes`0;
mapkey $F1 @MAPKEY_NAMEErase not displayed;@MAPKEY_LABELErase_ND;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;\
mapkey(continued) ~ Select `main_dlg_cur` `File.cb_file_erase`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `File.cb_file_erase`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_erase_not_disp`;
mapkey $F3 @MAPKEY_NAMEpurge all documents;@MAPKEY_LABELPURGE;@SYSTEMpurge;
pen1_line_weight 2
pen2_line_weight 1
pen3_line_weight 1
pen4_line_weight 2
pen5_line_weight 2
pen6_line_weight 2
pen7_line_weight 2
pen8_line_weight 2
use_software_linefonts set to Yes
allow_anatomic_features YES
display_coordinate_sys YES
display shade
default_dec_places 3
drawing_setup_file C:\PRO_E_WF3\Active_Drawing.dtl
edge_display_quality very_high
mdl_tree_cfg_file C:\PRO_E_WF3\tree.cfg
orientation ISOMETRIC
start_model_dir C:\Program Files\proeWildfire 3.0\templates
template_designasm C:\Program Files\proeWildfire 3.0\templates\inlbs_asm_design.asm
template_solidpart C:\Program Files\proeWildfire 3.0\templates\inlbs_part_solid.prt
plotter_command WINDOWS_PRINT_MANAGER
tol_mode nominal
WHEN i created new assembly file, the datums and views are there. However, when i want to add new part, by clicking
1) CREATE A COMPONENT IN ASSEMBLY MODE
2) SELECT PART tab, type in the name, click OK
under creation method, i see copy from existing, locate default datum, empty, create deatures.
Under COPY FROM box, the part name is always "inlbs_part_bulk.prt" instead of "inlbs_part_solid.prt"
what am i doing wrong??
thanks for your help..