WF 2.0
I have an existing model and drawing which has four legs that are at non-90 degree angle from each other (like a non-even X) and each leg has a hole in it, and there is one hole at the center of the X (see bad ascii below). Everything is created with rectangular coordinates. The drawing has the holes dimensioned with driven angular dimensions, from one hole to the other. I need to do something that will require me to re-create those angular dimensions, but I know no way to accomplish it. I can put angular dimensions on the edges of the legs, and these are the correct angles. But I can't move them to the holes. I tried rotating the axes in the drawing view, which worked, but the dimensioning does not seem to recognize them when it comes to creating angular dimensions.
__
|o|
______| |______
|0 o o|
"""""""| |"""""""
|o |
"""
I have an existing model and drawing which has four legs that are at non-90 degree angle from each other (like a non-even X) and each leg has a hole in it, and there is one hole at the center of the X (see bad ascii below). Everything is created with rectangular coordinates. The drawing has the holes dimensioned with driven angular dimensions, from one hole to the other. I need to do something that will require me to re-create those angular dimensions, but I know no way to accomplish it. I can put angular dimensions on the edges of the legs, and these are the correct angles. But I can't move them to the holes. I tried rotating the axes in the drawing view, which worked, but the dimensioning does not seem to recognize them when it comes to creating angular dimensions.
__
|o|
______| |______
|0 o o|
"""""""| |"""""""
|o |
"""