Wildfire4 doesn’t work anymore

[gbon]

Some weeks ago, I've installed and tried Wildfire4 F000 and it was ok (for some trails).


Now, I've tried it again and I can't make a new part or open an existing part.


Each time the "blended" screen is displayed just after opening new part, the software shut down.


I can't remember if I changed something in drivers install and settings.


It seems to be a graphic adapter problem (? ? ?)


I've tried :


WF4 F000 and M010 in both Win32 and win64 versions.


I'm on :


Windows XP64


opteron 170 + Quadro fx 1400


Any idea ?


Thanks

 

[Israr]

Change the configuration option


graphics win32_gdi


and restart ProE.


Israr

 

[gbon]

Thanks but the problem is the same.


I've also tried an other graphic card.


I removed all config.pro and config.win but nothing help.


regards,

 

[looslib]

Be sure you actually had F000 and not C010, they require different license files, as the internal version of Wildfire has changed.

 

[gbon]

Yes, shure.


I've tried F000 and M010.


It seems not to be a license problem because ProE start normaly.


I can open a drawing, for example.


I "only" have problem when opening a 3D object (prt, asm...)

 

[Israr]

For that ask ptc or the reseller or your CAD Adminstrator.


Israr