JLCIVICHBDX
New member
Hello every one,
I need assistance about the labelling of a variable group.
in the group:
I have a relay coil, 1 normally open contact & one normally close contact.
The coil of the relay is labelling, i want the same name for coil and contact.
The contact can be place ondifferente sheet...of the design.
exemple: coil = A101CR, N.O contat A101CR or N.C contact A101CR
A= sheet A1
01= number
CR=Relay
In the group properties :name_format = <prime_sht>##CR
labelling using = <name>
property definition: prime_sht
define function: (dg_derive_as_label)
parameter list: <sheets>
In the group properties, the master is the coil, I check cross ref shape, master/slave.
The result of using this, i have a different name for coil & contact..
If you have few ideas, let me know
JL
Edited by: JLCIVICHBDX
I need assistance about the labelling of a variable group.
in the group:
I have a relay coil, 1 normally open contact & one normally close contact.
The coil of the relay is labelling, i want the same name for coil and contact.
The contact can be place ondifferente sheet...of the design.
exemple: coil = A101CR, N.O contat A101CR or N.C contact A101CR
A= sheet A1
01= number
CR=Relay
In the group properties :name_format = <prime_sht>##CR
labelling using = <name>
property definition: prime_sht
define function: (dg_derive_as_label)
parameter list: <sheets>
In the group properties, the master is the coil, I check cross ref shape, master/slave.
The result of using this, i have a different name for coil & contact..
If you have few ideas, let me know
JL
Edited by: JLCIVICHBDX