Is anyone proficient with subroutines?
I'm turning with Pro Wildfire 2.0 and SUBROUTINES are a necessity.
How do youremove the first subroutine call? I have defined geometry at 0,0 and then I trans it through a subroutine call positioning the locations with CSYS.The first tool path is at 0,0 and this is not one of my CSYS picks.
I've tried using the profile in the first location but the remaining calls are off, the distance from 0,0. I've also tried moving the sequence CSYS as well, and nothing changes. including changing the CSYS from MACH_CSYS TOSEQUENCE_CSYS.
My work around is to edit the .ncl file, butobviously I'm missing something.
I have a small example .zip file if anyone is willing to have a look.
I'm turning with Pro Wildfire 2.0 and SUBROUTINES are a necessity.
How do youremove the first subroutine call? I have defined geometry at 0,0 and then I trans it through a subroutine call positioning the locations with CSYS.The first tool path is at 0,0 and this is not one of my CSYS picks.
I've tried using the profile in the first location but the remaining calls are off, the distance from 0,0. I've also tried moving the sequence CSYS as well, and nothing changes. including changing the CSYS from MACH_CSYS TOSEQUENCE_CSYS.
My work around is to edit the .ncl file, butobviously I'm missing something.
I have a small example .zip file if anyone is willing to have a look.