repeat region and relation

[tilco]

< http-equiv="Content-" content="text/; charset=utf-8">< name="ProgId" content="Word.">< name="Generator" content="Microsoft Word 10">< name="Originator" content="Microsoft Word 10">



Hi
everybody,



I have a problem with repeat region. I have a BOM table and on this table I
defined the costs of every part by adding a cost parameter for each part of the
assembly.



rpt.qty gives the amount of acticles used. And cost gives the cost of one
single element. Just with multiplying them each other, I supposed to find the total cost for
each article and added it as relation as the following:



Total=Asm_mbr_cost*rpt.qty



I can see
cost of each article. But the total amount of all articles does not work properly.



Although I see
the rpt.qty and costs of all elements. Total amount relation doesn

 

[contour]

"Total" column in your BOM shows:
<BLOCKQUOTE dir=ltr style="MARGIN-RIGHT: 0px">
<BLOCKQUOTE dir=ltr style="MARGIN-RIGHT: 0px">


1.Incorrect values?


2.Empty cells?


3."&Total"?</BLOCKQUOTE></BLOCKQUOTE>
Do you have other relations, specified for this repeat region?

 

[markp]

I think you need to use a summation. Table>Repeat Region>Summation.

Read more about it here:

http://www.ptc.com/cs/cs_26/howto/dwt_relt/dwt_relt.htm

 

[tilco]

thanks alot ...

I solved the problem today. There were correct values but some empty rows for some elements.

It found that it was up to the property of part parameters.. I should have define all of the parameters as numbers.

Thanks alot )

I am now trying to set up a seperate row at the end of the table which defines the summation of all of the costs..

I have also noticed this command summation. I will try it a little bit to do. I hope I will be able to do it..

thanks

and see you