Post Processor ( Need Help )

[DL_allainmfg]

We've recently updated to Pro E Wildfire instead of our old Pro E 20, but in doing so we've lost our Post Processor supplied by ICAM. I've tryed and tryed to set the post process built in to wildfire but I keep getting FIL file errors or something. My Bruning table is an old 3 axis table nothing fancy (MG industires Apollo series). Anyone who could help...please don't hesitate. I'm gonna be working at is some more meanwhile.
Edited by: DL_allainmfg

 

[Don.Rhea]

Try this statement in the cl file: PLABEL/MODIFY,1987,TO,6,TYPE,1


This should turn MULTAX/ON


PLABEL/MODIFY,1987,TO,3,TYPE,1


This should turn MULTAX/OFF





Donald W. Rhea

 

[Don.Rhea]

Somehow I postedmy reply here in error.


But I may be able to help with your Post Problem assuming you are using


Intercim/Austinnc GPOST.


Donald W. Rhea

 

[DL_allainmfg]

No I'm Using Pro/NC GPOST, but I don't know what i'm doing wrong in setting up my option file

 

[Don.Rhea]

I'm not a ProE guy. I'm a GPOST guy for about 15 years.


In the APT/GPOST world, more commonly call CIMPRO. I will not give you


the whole history. Anyway in the Cimpro world there is an option file generator


that lets you set the parameters of the machine tool. Did ProE supply this software?


Can you send me a .ncl file along with the UNCX01.Fxx & UNCX01.Pxx files.


If you can send the tap file the .ncl file made and a text document telling what is wrong I may be able to help.


What kind of machine tool are you running and what cnc control does it have?


reply to: [email protected]


Donald W. Rhea


Woodruff, South Carolina -- USA