mold design step !!?

[phucxoxo]

Hi everybody !!
sorry if this is a basic question

after i split all volume and extract all of them. i start design mold, but i don't know clearly the right step of them. ex , you should cut hole for Guide pin or cut a water line, or you should cut a hole for bolts , i don't which work is done first, second ..... and more ..... actually the follow step, thanks for reading .

 

[anup2c]

as my experiance, after split u can go for water line cut,then screw hole pitching


next step is sizinging ur inserts

 

[phucxoxo]

Hi anup2c ! thanks for your support
by the way when i want to cut a standard hole , ex: M12x1.5 , and there are many positions on part but these positions are not mirror and not a pattern, so how i cut them whith the fastest way, anybody , please help me because there are many , many same holes ...i can't make hole by hole... thanks

 

[rvmcad2000]

dear regarding holes. u can copy tham and paste them on different locations. or u can. if these holes are sketched one u can save the sketch and import it again where ever required.





ravi makhija


rvm cad soft

 

[Zaki]

as I am working, after split I dont touch those volumes. I make an assy file and some blank part files. assemble all extractedvolumes in assy and blank part. now I merge those ex volumes in blank parts and then use those new merges volumes for mold design. Why I do this?? for example, if costumer needs a big change in mold I can easily maniplate those geniune volumes as they contain only extracted features. Than regenarate those merged parts. If regenaration fails, I always have my geniune volumes so I make merge parts again and make my mold.


as we know, pro makes difficult to handle parts with shared information like assy cuts etc, without use of pro/intralink. It makes part files too much heavy in this case, even if you use intralink too.


Next step according to your way is to make a complete mold assy and assemble all components in mold base, make water lines, gate and runners and each and every thing to complete the mold.

 

[dasiddiqui]

Hi All


I have a Mold Tutorials


my email is [email protected]


Thanks


Siddiqui

 

[FireWild]

What do you mean? Do you want tutorials or do you have tutorials and want to share them?

 

[dasiddiqui]

hi FireWild


Yes I will share the mold design tutorials.


Thank And Regard


D.A.siddiqui

 

[phucxoxo]

thanks everybody for helping !!

 

[anup2c]

hi,phucxoxo....





if u got holes in different pitch..better make points by using sketch,then create holes in holes-skecth mode if u need counterbore hole,or what ever hole u want...then place holes using that points...if u need more hole,,just copy ,and paste it,,,





thats all

 

[sureshdesigns]

Hi All


I have a Mold Tutorials


my email is [email protected]


Thanks


Siddiqui

Please send me the tutorials becos now im entering in mold design


[email protected]

 

[mendes5913]

hi FireWild


Yes I will share the mold design tutorials.


Thank And Regard


D.A.siddiqui

HI!!


im new in the forum

can u share with me the tutorials to???

im knew in the world of mold designing

my mail [email protected]

 

[mendes5913]

Hi All


I have a Mold Tutorials


my email is [email protected]


Thanks


Siddiqui

Please send me the tutorials becos now im entering in mold design


[email protected]

Hei

can u please send me tutorials to?? my mail is [email protected]!!

thank u alot, im also new in mold designing

 

[erema]

<DIV>Hi dasiddiqui!

I too would like to receive Mold Tutorials. My e-mail: [email protected]

thanks.</DIV>
<DIV></DIV>

 

[cristelino]

Hi All


I have a Mold Tutorials


my email is [email protected]


Thanks


Siddiqui




can u please send me tutorials to?? my mail is [email protected]




Thanks