Join our MCAD Central community forums, the largest resource for MCAD (Mechanical Computer-Aided Design) professionals, including files, forums, jobs, articles, calendar, and more.
Is there a way in pro/e to have metric dimension conform to ASME Y15.5 standards. Her is the issue I am having. Basic dimensions state no trailing zero's also if dimension is less than whole number use a zero to left of decimal place.
thts correct. but if i want basic dim 55 and want a regular dim as 12.50 have do I keep the zero on 12.50 but not on 55 without going to properties for each dim
follow up please. I will give and examble. i want a dimemsion from datum to hole of basic 55mm. Form hole to hole basic 65mm. I want overall length to be 121.20. hole size to be 3.4mm but if i 3.40mm I can use our standard tol block if +/-.13. gtol box 0.20. So is there a set up function that will let me keep 55 and 65mm dim basic without zero's overall length at 121.20 and gtol at 0.20. So fa if we change setup we either all the trailing zero's showing 55.00 65.00 basic and 121.20 along with 0.20. If we change setup all zero's go away before and after decimal point. Sorry if I did not explain it well enough hopfully this well help. thanks for your time
If you are going by the standard trailing zeros are notused with millimeter dimensions. The only timetrailing zerosare used is with tolerances where one tolerance has more decimal places than the other. You see this when thetolerance modeis limits or plus-minus.
You need to decide if you want to follow the standard or use your own dimensioning scheme.
Metric dimensioning does NOT use trailing zero's as place holders for tolerancing. You need to adjust your thinking to this concept and add tolerances where needed if the drawing defaults are not tight enough.
When one company I worked for had the note on the drawings stating that the drawing was dimensioned in accordance with ASME Y14.5-1994, I modified the CAD system standards to refelect that. About 3 days later I get called into a meeting to discuss why the drawings were not toleranced as the manufacturing department wanted them with tighter tolerances that the trailing zero 'provided'. I had to explain that you can have it, put that dimension would have to be individually toleranced.
You can have general tolerances on metric drawings, just can't use a trailing zero to get the tolerance.
A dimension of 24.00 does not exist in metric drawings that conform to ASNE Y14.5. It is not only done for tolerance reasons, but for ease in reading a drawing. When I see a 24.00 dimension, I assume the drawing is done in inches. Likewise, if I see a hole that is 0.8, I assume it is a metric drawing, because inch drawings don't use the leading zero.
If you want the 24 dimension to have a tighter tolerance, then you need to explicitly tolerance the value, 24 +/- 0.8 or use 24.8/23.2 as the drawing value.
Where I work they do it exactly like that, they use number ofdp to determine accuracy. Almost every company I have worked in does it. They go against the standards. Even ISO doesn't allow trailing zeroes for metric, not just ASME. Getting companies to change, now theres a thing...
With ISO drawings, the way of controlling generaltolerances is by specifying ISO 2768. Is there an ASME equivalent? How do you specify general metric tolerances under ASME standards?
General tolerances are controlled just the same way for both english or metric drawings. You just have to realize that trailing zeros are not used in metric dimensioning. This means that you mave have more dimensions on your drawing with explicit dimensions.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.