Welcome to MCAD Central

Join our MCAD Central community forums, the largest resource for MCAD (Mechanical Computer-Aided Design) professionals, including files, forums, jobs, articles, calendar, and more.

Register Log in

Makino VMC S33 and U53i posts

usta

New member
Dear all,


I need prost processors for Maniko VMC s33 3 axes, and Makine WireEDM U 53i 5 axes.


Thanks for your kind help.


Regards,


Oner
 

edizazzo

New member
Hello Oner,



At BRT we develope custom post-processors for any type of machine and controller configuration.



If you are interested in working witrh a 3rd party custom post
developement team, we would be glad to see how we can help you out and
quote you on the cost of such a post.



Give me a call or drop me a line if you are interested.



Emilio Di Zazzo

[email protected]

514-727-7113 x 242
 

marker4x4

New member
edizazzo said:
...At BRT we develope custom post-processors...


Emilio, you should familiarize yourself with the "sticky" posts on this forum BEFORE mods get you.

It sounds like you do have the know-how to help out with the original
problem so perhaps you should have done just that, instead of selling
your services in here.... just my .02



 

marker4x4

New member
usta said:
I need prost processors for Maniko VMC s33 3 axes, and Makine WireEDM U 53i 5 axes.


Oner, Asking for a post is a broad question and as such unlikely to be answered.



ProE comes with several default posts for 3Ax mills - you should try them out and pick one that give you the closest results.



Having that done, make a list of what's missing in the code and post that in here, someone should be able give you a hand.



HIH

-marker
 

usta

New member
Marker,


Thanks for the advice.Actually I do have a pp for makino s33. I m having an error on Line 85 below, before G02 move. Do you have an idea what the problem is.Does F code with G02 might cause a mistake? if I delete thisline from code, then othe go2 or g03 codes doesnt cause a mistake.


N77 G0 G91 G28 Z0
N78 T5 M6


N79 G90


N80 G54


N81 S4000 M3


N82 G05 P10000


N83 G00 X-8.875 Y9.7


N84 G43 Z20. H5


N85 Z-1.


N86 G02 X-.448 Y-.175 Z-2.236 I-1.573 J-9.875 F1500.


N87 G01 X-.45 Y-.008


N88 G02 X-.45 Y-.008 I.45 J.008


N89 G01 X-4.449 Y-.075


N90 G02 X-4.449 Y-.075 I4.449 J.075
 

marker4x4

New member
usta said:
Marker,


Thanks for the advice.Actually I do have a pp for makino s33. I m
having an error on Line 85 below, before G02 move. Do you have an idea
what the problem is.Does F code with G02 might cause a mistake? if I
delete thisline from code, then othe go2 or g03 codes doesnt
cause a mistake.


N77 G0 G91 G28 Z0
N78 T5 M6


N79 G90


N80 G54


N81 S4000 M3


N82 G05 P10000


N83 G00 X-8.875 Y9.7


N84 G43 Z20. H5


N85 Z-1.


N86 G02 X-.448 Y-.175 Z-2.236 I-1.573 J-9.875 F1500.


N87 G01 X-.45 Y-.008


N88 G02 X-.45 Y-.008 I.45 J.008


N89 G01 X-4.449 Y-.075


N90 G02 X-4.449 Y-.075 I4.449 J.075


Oner,



I assume that the error you're referring to is being generated by the machine while running the program?

What does it say (the error message)?

Line 85 looks innocent, however in line 86 you're trying to feed with
1500IPM (again, I assume that it's IPM) and that may be the problem if
the machine doesn't support such high feedrate. I know that Makinos are
FAST, but I'm not all that familiar with them. Another thing, in line
86 you're moving all three axes together (helical move) for some
machines that's an option, so check on that.



Try to be more specific and post all error messages etc.



-mark
 

usta

New member
Dear All,


Thanks for the advice, I have solved the problem by unselecting the Output ARCSLP blocks,under Circular Motion in Option file generator.


Now helical moves are generatingwith G01, and there is no more problem.


My best regards,


Oner
 

Sponsor

Top