Continue to Site

Welcome to MCAD Central

Join our MCAD Central community forums, the largest resource for MCAD (Mechanical Computer-Aided Design) professionals, including files, forums, jobs, articles, calendar, and more.

drawing view to dxf

patyala

New member
Hi all,



I would like to save only one view (main view) of a Pro/E drawing to
dxf. I know that is a command: save as... and dxf, but it saves
everything: all views, dims, notes, frames, etc. I need only one view
and only the geometry lines. We have hundreds of drawings, and for a
laser cut machine we need a dxf from the main view, but it is too big
work to open all of the dxfs and delete the unneeded things. Could
somebody help me? Thanks,



Peter Bo
 
interesting, we often get stuff laser cut and they dont care if there
is extra information on the drawing as they only reference which is
applicable.



i guess the trick is knowing which view :) depending on your standards
 
We also do a lot of laser stuff. I think there are two issues here. The first one is the conversion from PRO/E to DXF - no unknowns here. Just to mention that some of the information you don't want can be quite useful, like tolerances, datums, and so on. The second issue is to provide your post-processor with proper information. It can normally interpret only lines and arcs. This is where thedimensions get in the way. If I wouldtake a guess, I would look into the NC-Processing module - but I don't have any experience with it.


Regards, Mihai.
 
patlaya,


I sometimes save Pro/E drawing to dxf & I found a way to save a certain view only, just erase a particular view in which you don't want to include, just erase the view not delete so that you can resume it anytime you want, also just blank the sheet format so that frames will not be included in converting to dxf,for dimentions, notes,etc. just hide it from layers.
Edited by: jayuy
 
Hi,

sorry, I was a bit busy, but I am back. The solution we found is easy
like jayuy's solution. We make an extra view outside of the frame from
the developed plate in scale 1:1 and export to dxf. The Programmer
delete the frame and everithing inside it, this is only one click. The
most elegant way could be the saving only a view to dxf, but
unfortunatelly this is not part of ProE yet. Maybe in the future.
smiley1.gif
Until that we make on this way. Thank you for helping me!

Best regards,

Peter Bo
 
Put an extra view on a separate sheet with no format, dimensions or notes at scale 1:1 & save as dxf. Only the current sheet is output.
 
We count the sheets on the format, and the blue collar workers would
search for the extra sheets. The time will answer our questions, but
now this seems the best sollution.
 
make a seperate drawing, pop in the desired view as 1/1, delete the
format, snapshot the view, and delete all the unwanted lines, and save
as a .dxf

and there you go!<img>
 

Sponsor

Articles From 3DCAD World

Back
Top