Åszi Tibor
New member
Hy!
I've created a surface with curved section, as seen on the following picture:
![Képkivágás.jpg Képkivágás.jpg](https://www.mcadcentral.com/data/attachments/0/588-6371eff848c98793c9c92f28fdbe9d01.jpg)
Not a big deal, just an extrusion (or sweep through a straight line). That's the semi-finished product.
Now, the finished product is bent, like this:
![Képkivágás1.jpg Képkivágás1.jpg](https://www.mcadcentral.com/data/attachments/0/590-ada89e7fbe6f26424e5f8e0d7a5b28a6.jpg)
Again no problem to design, a sweep can do it.
The problem is that I can't put them in a family table. I want the first semi product to be the generic, and the bent one to its "children" because there are different size of bend radiuses.
I can't find a feature or dimension to get this working. Although I tried to sweep through a straight line and a curved one, and then suppress one or the other in the family table, but i dont think this is the "clearest" way to do it.
I've created a surface with curved section, as seen on the following picture:
![Képkivágás.jpg Képkivágás.jpg](https://www.mcadcentral.com/data/attachments/0/588-6371eff848c98793c9c92f28fdbe9d01.jpg)
Not a big deal, just an extrusion (or sweep through a straight line). That's the semi-finished product.
Now, the finished product is bent, like this:
![Képkivágás1.jpg Képkivágás1.jpg](https://www.mcadcentral.com/data/attachments/0/590-ada89e7fbe6f26424e5f8e0d7a5b28a6.jpg)
Again no problem to design, a sweep can do it.
The problem is that I can't put them in a family table. I want the first semi product to be the generic, and the bent one to its "children" because there are different size of bend radiuses.
I can't find a feature or dimension to get this working. Although I tried to sweep through a straight line and a curved one, and then suppress one or the other in the family table, but i dont think this is the "clearest" way to do it.