Hi,
I am new at this forum and also from non english speaking country, so please excuse my written english.
Recently I purchessed new Thinkpad E540. It has following specs: Intel i5 4210M processor, 4 gigs of ram and Intel HD 4600 integrated graphic card. I am running Creo 2.0 M100 on Windows 8.1. Latest graphic drivers are installed, Windows are up to date. Creo starts fine but acts kind of funny - I am very annoyed by that. Let me elaborate. After setting working directory, I open assembly with around 700 parts and after 10 sec or so the 3D model loads. Til now everything is fine, I can turn the model, i can zoom in and out. Now the problem. When I click on "open" icon the following happens: "file open" dialog box starts to open but does not open swiftly like iz should - for 5 sec or so dialog box just go black while mouse indicator is turning around and top of the dialog box indicates: "File open (not responding)". After dialog box finaly opens, I can select part of drawing and open it normally. The weird thing is that sometimes everything works perfectly normal - but most of the time it is not. I also tried with config64.pro file "graphics win32_gdi". If software rendering is enabled this problem dissapers but the program is so slow that is not usable. Also on PTC web page there is a document that says Intel graphic cards in Lenovo products are certified.
Had anybody encountered and solved this problem. Any advise on this matter would be of great help to me.
Best regards,
Zvonko
I am new at this forum and also from non english speaking country, so please excuse my written english.
Recently I purchessed new Thinkpad E540. It has following specs: Intel i5 4210M processor, 4 gigs of ram and Intel HD 4600 integrated graphic card. I am running Creo 2.0 M100 on Windows 8.1. Latest graphic drivers are installed, Windows are up to date. Creo starts fine but acts kind of funny - I am very annoyed by that. Let me elaborate. After setting working directory, I open assembly with around 700 parts and after 10 sec or so the 3D model loads. Til now everything is fine, I can turn the model, i can zoom in and out. Now the problem. When I click on "open" icon the following happens: "file open" dialog box starts to open but does not open swiftly like iz should - for 5 sec or so dialog box just go black while mouse indicator is turning around and top of the dialog box indicates: "File open (not responding)". After dialog box finaly opens, I can select part of drawing and open it normally. The weird thing is that sometimes everything works perfectly normal - but most of the time it is not. I also tried with config64.pro file "graphics win32_gdi". If software rendering is enabled this problem dissapers but the program is so slow that is not usable. Also on PTC web page there is a document that says Intel graphic cards in Lenovo products are certified.
Had anybody encountered and solved this problem. Any advise on this matter would be of great help to me.
Best regards,
Zvonko