View Full Version : fluid line should move with part

04-24-2006, 08:50 PM
Hi guys

I have an arm and body, assembled like a T-shape. There are fluid lines going to the bottom of the arm (bottom of the T). I want to know that, is there a possibility to make the fluid line move along with the arm on either sides????

04-24-2006, 08:57 PM
Post a picture to help visualize what you are trying to do.

It sounds like an Analysis Feature would accomplish this.

04-24-2006, 09:35 PM
hacks thanks for your reply

I am new to this routing but i have made mechanism work not with a fluid line to follow the program

2006-04-24_143426_routing.zip (http://www.mcadcentral.com/proe/forum/uploads/govindswaroopm/2006-04-24_143426_routing.zip)

06-01-2006, 08:14 AM
Hi Govind,

Pls follow the steps for creating the Movable Fluid lines.

1.Create a CSYS in the movable part.
2.Create points refer to that CSYS created in the movable part.
3.Route the Fluid lines with those points.
4.you may need to adust the points considering both extreme positions of the movable part.Its basically a trial and error method only for checking the interference.

The basic idea behind this since all the points are refering the CSYS that u've created on the movable part,the Fluid Lines u've routed through the points will also be behave parametrically.

If you have any more doubt ,contact me