Center mark axis placement

• Sep 25, 2007

• #1

K

Kemangan

New member

I am having problems creating a center mark at several radii locations on my drawing. Usually I select the "Show/erase dialog box" and then select "axis", then "Feature & veiw" and have no problems. In this instance theradii aretangent to an angle. I don't know if thiscontributes topart of the problem or not. I have attached a picture of one of the features I am attempting to dimension (1.475). I want to place the center mark at the 7/32" radius to show what the dimension is measured to.2007-09-25_103326_Dimension.zip

 

• Sep 25, 2007

• #2

mjcole_ptc

New member

Have you ever heard of a JPEG .jpg ?

 

• Sep 26, 2007

• #3

K

Kemangan

New member

Sorry, Don't know what happened there. Try this:


View attachment 4214

 

• Sep 26, 2007

• #4

P

prohammy

New member

Kemangan,


Is the 'elliptical' feature created as a revolved or straight cut?


Kev

 

• Sep 26, 2007

• #5

K

Kemangan

New member

If you mean the diameter which the 5

 

• Sep 26, 2007

• #6

P

PRStockhausen

New member

By default a partial circle does not have an axis to show. To get an axis to show, you can create one thru the cylinder after creating the feature or for extruded features add an axis point to the sketch. To get axes for all arcs in an extrsion, use the config option "show_axes_for_extr_arcs"

 

• Sep 26, 2007

• #7

K

Kemangan

New member

That makes perfect sense. Thanks for clearing that up for me.


View attachment 4215

 

• Sep 27, 2007

• #8

G

garymig

New member

Just make sure that there is one in the model.

 

• Sep 27, 2007

• #9

K

Kemangan

New member

It's all good