Join our MCAD Central community forums, the largest resource for MCAD (Mechanical Computer-Aided Design) professionals, including files, forums, jobs, articles, calendar, and more.
I make a sketch for a trajectory very simple but in the CL put smalllines between the arcs. I sure are tangent and must be continuous but these small lines (G1
<DIV>You do not have tangent arcs in your sketch even though the geometry is tangent. You have defined the cut sketchby using edge. I can tell by the ~ line on the arcs. Pro handles these as splines. It does do some arc fitting but is not as pure as tangent arcs. I believe if you redefine your sketch using tangent arcs you will get the result of arc to arc and you will not have the tiny linear moves that prevent cutter comp from working.</DIV>
I make the sketch under your advice but still have the same problem. I think maybe is a problem whit accuracy but I put .0000001 insketch-options-accuracy-relative.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
