srinivas.routhu
New member
Hi all,
Need help ingenerating taper threads which i need to model from an old hand made drawings, in the image attached 2011-09-24_045922_taper_threaDS.zip
in the section view the dimensions 1/2 NPTF thread is shown with '0.864 AT STD TAPER', The taper thread is designated Dia.0.67 to as 0.817,
but left bottom corner the view The taper thread is designated as NPTF thread blank from Dia.0.67 to as 0.805.
Can some one suggest the correlationof both the views to generate a thread model.
Thanks in Advance,
Srinivas.Routhu
Need help ingenerating taper threads which i need to model from an old hand made drawings, in the image attached 2011-09-24_045922_taper_threaDS.zip
in the section view the dimensions 1/2 NPTF thread is shown with '0.864 AT STD TAPER', The taper thread is designated Dia.0.67 to as 0.817,
but left bottom corner the view The taper thread is designated as NPTF thread blank from Dia.0.67 to as 0.805.
Can some one suggest the correlationof both the views to generate a thread model.
Thanks in Advance,
Srinivas.Routhu