I have a problem!!!

[foolmankh]

Hi everybody!!!


I have a problem when i used Pro WF2 with Mechanica application.


when i click "preview" on the dialog box, something's wrong.


Can everyone help me to solve it!?


Thanks & Best regards


P.s: this's pix of problem 2005-12-13_211339_pro_wf2.zip

 

[Israr]

very simple, your mechanica is not installed or you have not configured it to integrate mechanica with proe.


Israr

 

[Remmerv]

Israr is right, looking at the right Icon toolbar it seems to me you are in FEM-mode. Most people who install MECHANICA forget to place a checkmark for "product interoperability" during the Pro/Engineer setup. This checkmark triggers a additional window during installation where the administrator can tell Pro/E the installation path of Pro/MECHANICA (and Intralink). If MECHANICA (or Thermal and Structural Simulation as it is now called) is installed and a license is available you should be able to enter the MECHANICA application (with a active part or assy)without a checkmark for FEM mode (you now probably cannot remove that checkmark!). Just run PTCsetup.exe in the PRO/Engineer \bin directory and correct this setting.


Victor