Make parameter read part dimensions
Ok here goes. I have a parameter in all my parts "SIZE" for the BOM. It should show the height width & length of the part.
Can I write a relation to have creo do this automatically and also have the format look like this:
"123.00 X 456.00 X 789.00" I want the x's in between.
Possible? If so how?
Thanks in advance.
12-15-2016, 02:53 PM
If they are standard parts , Yes you can.
So what do I mean by standard, I have used rectangle start blocks for some of my tool designs these start blocks had what your looking for. I do not have access to the start blocks now but if you believe this is a match for what you are looking for I can look them up.
Last edited by canoemike; 12-15-2016 at 11:28 PM.
Sounds like what I want.
I will find an example file tomorrow at work for you.
I like your signature----- "Git er done"
12-19-2016, 11:01 PM
But I get the note in the bom it doesn't pickup the dimension number. See pic.
Wait a minute! Success!! Had to update the BOM.
Thanks Canoe I owe ya!
Glad I could help.
Originally Posted by wildmodeler
One question for you. What industry are you working in ?
I work in aerospace industry
Tags for this Thread