Results 1 to 2 of 2
  1. #1

    Any way to replicate "Ctrl + 8" from SolidWorks?

    I have already replicated mapkeys for "Ctrl + 1" to 7. This is located in my config.pro. Very handy and quicker way than having to click the little button on top (view manager), scrolling, then clicking on the good view.

    Code:
    mapkey 1 @MAPKEY_LABELFront_View;~ Command `ProCmdViewNamePick` 1 ;\
    mapkey(continued) ~ Select `nameviewlist` `nv_list`1  `FRONT`;
    mapkey 2 @MAPKEY_LABELBack_View;~ Command `ProCmdViewNamePick` 1 ;\
    mapkey(continued) ~ Select `nameviewlist` `nv_list`1  `BACK`;
    mapkey 3 @MAPKEY_LABELRight_View;~ Command `ProCmdViewNamePick` 1 ;\
    mapkey(continued) ~ Select `nameviewlist` `nv_list`1  `RIGHT`;
    mapkey 4 @MAPKEY_LABELLeft_View;~ Command `ProCmdViewNamePick` 1 ;\
    mapkey(continued) ~ Select `nameviewlist` `nv_list`1  `LEFT`;
    mapkey 5 @MAPKEY_LABELTop_View;~ Command `ProCmdViewNamePick` 1 ;\
    mapkey(continued) ~ Select `nameviewlist` `nv_list`1  `TOP`;
    mapkey 6 @MAPKEY_LABELBottom_View;~ Command `ProCmdViewNamePick` 1 ;\
    mapkey(continued) ~ Select `nameviewlist` `nv_list`1  `BOTTOM`;
    mapkey 7 @MAPKEY_LABELDefault_View;~ Command `ProCmdViewNamePick` 1 ;\
    mapkey(continued) ~ Select `nameviewlist` `nv_list`1  `Default`;
    Problem is, I am still missing this last one (Ctrl + 8). Is there any way to do it in Pro/E?

    I am asking this because often, while sketching on an angled plane, I hit my middle mouse button by mistake and I loose the proper angle. I have yet to find a way to recover my normal view to this sketch...

    For people who havn't used SolidWorks, "Ctrl + 8" resets your view normal to your sketch plane.

    Thanks

    Sifu

  2. #2
    What version of Creo are you using?

    In Sketch mode, there is an icon in the In Graphics Toolbar for Sketch View, which does this. You can create a Mapkey to click this icon.
    David R. Martin II
    MCAE Consulting, LLC
    www.creowindchill.com
    dmartin@creowindchill.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •