Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 42
  1. #11
    Are you looking for a post written in conversational or iso gcode?

  2. #12
    Have bought an Old machine,
    Heidenhain TNC355. Do anyone have postprocessorfiles to mastercam? Would
    be wonderful. Have not got it working perfect.





    Would be great!





    Thanks in advanve!





    Tobias

  3. #13
    Quote Originally Posted by appinmi
    I have a 3 axis post for a TNC-430 and a 5 axis post for the 50 evolution
    Georgios LS

  4. #14
    hi every one


    we have dmu 50 evolution 5axis machining center .. we are using proe wildfire 2 for machining we have post processor for its 3axisout put but don't have post processor for its 5axis out put please send me the post if you have ...


    i will be very thankful..


    mushtaq ahmed


    mushtaq2006dm@hotmail.com


    mushilove4all@yahoo.com

  5. #15
    2006-04-04_195245_Arcs.zip this is a fully working post, for mcam, to run TNC355 in conversational, arcs in xy, xz and yz etc.

  6. #16
    Again, I have a 3 axis post for the TNC-430 I will let you have it for free. All you have to do is email me, and I will reply with the post attached. But, please do not try to sell this to anyone. I am doing this to help others in need, not to make a buck.
    [img]smileys/smiley20.gif[/img]<u><font color=MAGENTA> AllanP</font>

  7. #17
    I also have a 50 evolution 5 axis positioning post. I didn't get a chance to finish the 5 axis surfacing before my leaving prior company. Same deal goes, free.
    [img]smileys/smiley20.gif[/img]<u><font color=MAGENTA> AllanP</font>

  8. #18
    Anyone have TNC 410 postprocessor? I'm programing in ProE and our machine is Hermle U630T.

    Edited by: Dablyx

  9. #19
    Hi guys
    i have a post processor perfectly working(minor editing) for tnc 426 convensional.
    [img]smileys/smiley16.gif[/img]
    Dibu

  10. #20
    Quote Originally Posted by dibz
    Hi guys

    i have a post processor perfectly working(minor editing) for tnc 426 convensional.
    Do you want to send me to try on eksiyu@hotmail.com. I have tnc 355 4 axis.


    I have working perfectly proe postprocessor for tnc2500b written in iso
    code, but i always must to change parametar on machine, becasuse i
    manualy write on heidenhain code.

    If anyone want's to send him this postprocessor, send me a PM.

    Sorry for my bad english.

    Edited by: xenoks

Page 2 of 5 FirstFirst 1234 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •