morsetaper2
New member
I have a home computer I run ProE on. I occasionally bring work home and use this computer by borrowing a license from my work license server.
Its a Dell Precision 380 purchased in June of 2005. It works fine for internet browsing, MS office products, etc. But not good w/ ProE WF4. It was a ProE certified machine for WF2 when it was orig purchased. And it worked fine on WF2 & WF3. But on WF4 it has problems and ProE crashes.
MACHINE: Dell precision 380, P4 processor 521, 2.80 GHz, 1 MB L2 cache, 800MHz
RAM: 2 GB
VIDEO CARD: ATI FireGL V3100, 128 MB, dual VGA or single DVI/VGA
Now the problem w/ ProE is moving or rotating assy models it gets coggy and the image lags my mouse moves, highly annoying and frustrating. Single parts, or a single drawing, a couple open windows, its OK and useable.
Mid and larger assys are trouble. And if the model has datum curves, or I change the background to white, ProE will crash often enough that its totally unusable. I have tried downloading different video drivers from the Nvidia website but no help.
Was orig a 1GB RAM machine, I filled the remaing slots with an additional GB to bring it up to 2 GB RAM. No help.
So I was thinking a 125MB video card is just not adequete. I would consider throwing $100+ or so at a better video card if it might help.
It is a 2005 system, so maybe it is time to replace. But it only has problems in ProE, and its my home computer, so I'm not anxious to throw a bunch of $$ at a new home computer that for the most part works fine.
Is upgrading the video card an option to get ProE useable? It is a "PCI Express" card. Or is the bus/motherboard/system just too old?
Appreciate any advice, and Thanks!
Mark
Edited by: morsetaper2
Its a Dell Precision 380 purchased in June of 2005. It works fine for internet browsing, MS office products, etc. But not good w/ ProE WF4. It was a ProE certified machine for WF2 when it was orig purchased. And it worked fine on WF2 & WF3. But on WF4 it has problems and ProE crashes.
MACHINE: Dell precision 380, P4 processor 521, 2.80 GHz, 1 MB L2 cache, 800MHz
RAM: 2 GB
VIDEO CARD: ATI FireGL V3100, 128 MB, dual VGA or single DVI/VGA
Now the problem w/ ProE is moving or rotating assy models it gets coggy and the image lags my mouse moves, highly annoying and frustrating. Single parts, or a single drawing, a couple open windows, its OK and useable.
Mid and larger assys are trouble. And if the model has datum curves, or I change the background to white, ProE will crash often enough that its totally unusable. I have tried downloading different video drivers from the Nvidia website but no help.
Was orig a 1GB RAM machine, I filled the remaing slots with an additional GB to bring it up to 2 GB RAM. No help.
So I was thinking a 125MB video card is just not adequete. I would consider throwing $100+ or so at a better video card if it might help.
It is a 2005 system, so maybe it is time to replace. But it only has problems in ProE, and its my home computer, so I'm not anxious to throw a bunch of $$ at a new home computer that for the most part works fine.
Is upgrading the video card an option to get ProE useable? It is a "PCI Express" card. Or is the bus/motherboard/system just too old?
Appreciate any advice, and Thanks!
Mark
Edited by: morsetaper2