Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    I need your help: at the company I work as a CNCprogramer we bought a CNC milling machine that has 3 axis and numerical control: TNC 530- HEIDENHAIN. I need a post-processor for it. I work in PRO/ENGINEER. Thank you!


    you can contact me also at: nagudzub18@hotmail.com
    buzdugan ioan

  2. #2
    I have one for a TNC-430. I do not know if it will work on a TNC-530, but you are welcome to it. Just PM me and I will reply with the files attached.
    [img]smileys/smiley20.gif[/img]<u><font color=MAGENTA> AllanP</font>

  3. #3
    I have worked on the controller you mentioned, also i have fully working postprocessor for this.


    just tell me in which formate do want the post's out put.


    in Heidenhain format or ISO formate
    sohail abbas

  4. #4
    Hi giovani


    i have uploaded the post which is 100% compatible with 430 as well with iTNC530.Download this and enjoy the pro-manufacturing life.


    in case of any problem feel free to mail me
    sohail abbas

  5. #5
    Quote Originally Posted by sohail abbas
    i have uploaded the post which is 100% compatible with 430 as well with iTNC530.Download this and enjoy the pro-manufacturing life.


    in case of any problem feel free to mail me
    I'm also very interested in this post.
    My apologies for my stupid question but where I can download it ?

    Best regards,

    John

  6. #6
    Hi Orac


    i am uploading the postprocessor for you, below is the link, i hope there will be no more confusion.


    2006-06-08_020915_sohail-abbas.rar
    sohail abbas

  7. #7
    Thank you very much Sohail Abbas.

    Best regards,

    John

  8. #8
    hello sir sohail, can i have the link to download the post
    processor for heidenhain in ISO format.

    the program created in cadcam in heidenhain format has an
    error on CC and C, what is the solution here

  9. #9
    That will be the arc end point error on controoler side, one option is that you can increase the accuracy of arc end point inside your Heidenhain controller, if you want the setting of that parameter I can sent this to you.
    SOHAIL ABBASS

  10. #10
    Quote Originally Posted by sohailabbas View Post
    That will be the arc end point error on controoler side, one option is that you can increase the accuracy of arc end point inside your Heidenhain controller, if you want the setting of that parameter I can sent this to you.
    Hi Sohail,

    It would be very much helpful if you can provide with PP for Heidenhain iTNC 530 PP (DMU 80P) for Creo.

    I tried downloading from the provided link but no success.

    Thanks in advance.

    --
    Dhinesh

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •