Continue to Site

Welcome to MCAD Central

Join our MCAD Central community forums, the largest resource for MCAD (Mechanical Computer-Aided Design) professionals, including files, forums, jobs, articles, calendar, and more.

cam connection to a rotary cam

puppet

Moderator
anyone have any idea why i can not create a cam connection between the
bearing surface of the vertical slider to the rotary cam?



it doesnt let me select the raised cam edges.



the cam was made using

just a vss-cut using a datam graph





any help would be appreciated.

View attachment 459

the slider is connected via

1) cylinder constraint. ( up and down)

2) planar constrait. ( aviod twist)

hm,m might replaces them with a slider constraint.
 
todefine a kinematic analysis, try a slot connection but not a cam connection.offset the ratory cam edge for slot curves and make a point at center of roller for follower point.
 
yeah i can do that but its not a realy analysis/simulation



i prefer a cam connecttion as it works on surfaces



also i found out that when making the cam profile, its best not to use splines.

so i fixed it up with few straight lines and rounds



now i can select the surfaces and it says it works.

but the bearing surfaces is just going crazy in the air .. totalyl unconnected to the cam profile



and yes lift off is disabled
 

Sponsor

Articles From 3DCAD World

Back
Top