gopivemuri
New member
Status code 9: MATRIX_SINGULAR_OR_INDEFNITE
may not have adequate restraints
results not saved.
this is the message that was displayed, can any one help
me with this.
I am designing a bottle and using shell meshing, I am
using variable thickness, but specifying same material
properties
The thickness was given as 2mm on the top near the cap
and 1mm at the base. At the center itis varying from 0.2-
0.25mm.
may not have adequate restraints
results not saved.
this is the message that was displayed, can any one help
me with this.
I am designing a bottle and using shell meshing, I am
using variable thickness, but specifying same material
properties
The thickness was given as 2mm on the top near the cap
and 1mm at the base. At the center itis varying from 0.2-
0.25mm.