Continue to Site

Welcome to MCAD Central

Join our MCAD Central community forums, the largest resource for MCAD (Mechanical Computer-Aided Design) professionals, including files, forums, jobs, articles, calendar, and more.

Solar car Aerodynamic Analysis

OSU_SVT

New member
Hello everyone!

I am part of the Oregon State Solar Vehicle Team. We are
designing our second generation solar car, for the North
American, and World Solar challenge. We already have the
frame and drive systems, and have a 'almost' finished
body design.

However, I believe that the body for our solar car is
the most important part of the WHOLE car. If the body isn't good enough, then the whole car will fail. Of
course, no matter how long you spend, the body will
never be perfect. We just need to get it to a point
thats good ENOUGH.

To that extent, we have gained access to a server farm
and a Fluent expert from HP (The computer company) as a
sponsorship. The expert we are working with has
performed analysis that were accurate to within 10% of
real results, so we trust the results she gives us.

However, the analysis she runs take quite a looooong
time to complete. We cant have her spend too much time
on our project. So for that reason, we are using
Solidworks Flow Simulation to get rough ideas as to if
one design is better then another, before we give the
model to her to test.

Anyways, enough of the history! Our model is still experiencing excessive lift, and the force required to
drive our model forward is on the verge of
sustainability when compared to the expected output of
our solar cells.

We are still not completely sure if we are using Flow
Works correctly. Actually, im sure we are not :) The
reason for this is because we are still trying to figure
out how to incorporate a ground plane into the
simulation. Im know that the ground plane is very important, as our current simulations doesn't give us
any idea as to the interaction between the cars body and
the ground.

So, any help/advice etc would be extremely useful. Here
are the current stats/settings we are using.

-Solidworks 2009.
-The car is set on a giant rectagle, which is the
'ground'
-The computation domain is set to .03 m below the
surface of the ground.
-The top surface of the ground has the boundary conditions of "real wall" and is set to have a velocity
the car is going.
-The initial settings are: -25 m/s along the positive Z
axis, Surface roughness of 30 Micrometers, the study is
set to an external study, excluding internal volumes,
and the other option is checked as well (Cant remember
what it is), And the initial mesh is set as high as
possible.
-The goals for the study are simply Global Force, and
Global force in the X, Y, and Z. We take the Global
force, and multiply it by the velocity, to get the
predicted power consumption in Watts.

So, I would post photos, but the upload thing here is
not working for some reason... so I cant just provide screen shots of my settings, setups, etc. However, here
are photos from our website where photos of the newest
car design is posted: http://oregonstate.edu/groups/solar/node/95

If you have experience in aerodynamic analysis using
Solidworks 2009, please let me know your advice! If you
can take Solidworks Models (Perhaps parasolids) and run
it through your own fluids programs, perhaps we can do
that.

Please let me know!

Mike
 
Hi Mike

I can help to solve your problem.
In my uni I have all main CFD-codes running on Pcs and if problem is huge rather powerfull supercomputer+ Ansys CFX.

Yours

Valery Rutkovskiy
Head eSmartDATA
Siberian Federal University
Krasnoyarsk
Russia
[email protected]
 
It was a bright sunny afternoon with a fresh breeze blowing from the northeast. The small sloop was making a series of very short tacking maneuvers as it made its way gingerly up the narrow channel.


The forest marched down the steep rocky hillsides to abruptly meet the sea below on both shores. The tiny but sturdy craft was tossed precariously by the rip tides created in the close waterway. The sole occupant reset her grip on the tiller and brought the sloop around in yet another tack headed toward a little niche in the eastern shoreline. She was kneeling in the boat's compact
wow power leveling cockpit watching carefully ahead for any telltale clues on the water that dangerous rocks lay just out of sight below the surface. She held her course on a starboard tack until she was just past a rocky spur which broke the forest cover and actually spilled over into the sea.


When she was about eighty yards from the shoreline she abruptly swung the boat head to the wind bringing it to an almost dead stop in the water. After loosing the sheets on both her jib and mainsails, she quickly scrambled to
world of warcraft gold the bow and let her anchor line out till she felt the anchor touch bottom. She then expertly continued to pay out enough of the line to properly set the anchor, allowing for both safe swinging room as the wind might shift and the expected change of depth as the tides came and went.


She had been so occupied with the Business of sailing her small sloop, that she had not noticed that she had an audience.
world of warcraft power leveling A tall slim young man in blue jeans, T-shirt and black leather bomber style jacket was sitting on the rocky spur smiling with open admiration at the sailing skill of the woman skipper on the neat little sloop. As she stood from securing the anchor and started to lower and tie down her sails, he arose and quickly walked back up into the trees behind him. So she never knew that her arrival had been noted.


When the sloop was secured to her satisfaction, Katherine went below and put a tiny kettle on the single burner in the diminutive galley. As she waited for the water to boil, she pulled a thick dog-eared ring binder out of a wow gold shelf to the left of the companionway and opened it to the last entry. This book served a dual purpose as a ship's log and personal journal. She noted her time of arrival and location of the tiny sheltered anchorage, the weather which was close to perfection for a sailor and a personal note that this seemed a great spot in which to write and create.
 

Sponsor

Articles From 3DCAD World

Back
Top