We have a fairly large tool assembly inserted into a drawing. The main view goes in fine with no errors. However, we go to take a section view right down the middle and the component lines in the section view turn gold (the dangling sketch error color). We go to take 5-6 section/detail views from this and it gives half the views in the same gold color, some in the normal black line font.
We tried doing a CTRL-Q on all the views, didn't work; tried to re-do the main section view, didn't work; double checked the layer properties, everything looks normal.
We right click the gold section view and check the "What's Wrong?" option and it tells us that there is an error in feature definition. The model contains no errors and re-doing the view didn't do anything.
ANY SUGGESTIONS?? thanks in advance.
We tried doing a CTRL-Q on all the views, didn't work; tried to re-do the main section view, didn't work; double checked the layer properties, everything looks normal.
We right click the gold section view and check the "What's Wrong?" option and it tells us that there is an error in feature definition. The model contains no errors and re-doing the view didn't do anything.
ANY SUGGESTIONS?? thanks in advance.